Salt Spray Corrosive Test Chamber Salt Fog Test Device
 Salt Spray Corrosive Test Chamber Salt Fog Test Device

Salt Spray Corrosive Test Chamber Salt Fog Test Device


Description: salt spray test chamber adapted  to the surface treatment of various  mate


Product Details
Technical Parameters

  Salt Spray Corrosive Test Chamber Salt Fog Test Device

 

 

Introduction:

Salt Spray Corrosion Test  Chamber is the use of salt spray corrosion way to detect corrosion, respectively, the reliability of the sample, salt spray refers to the atmosphere by diffusion system composed of tiny droplets of salt, artificial environment of three anti-series one of many companies need to simulate the destructive product of marine climate surrounding the product caused by salt spray chamber so the line should run.


Features:
         1. Local temperature and humidity inside and outside the box are used for A-level gray high-corrosive PVC, for salt spray, copper acetate, and other test specifications Test
         2. It uses the A-level German imports of gray PVC material.
         3. It uses sophisticated Class A gray PVC material designed "V" shape long, products tested by the 15 ° -30 ° angle be adjusted.
         4. It uses a 5mm thick transparent imported high toughness PVC board, bending method designed to cover 100 degree ridge-type transparent with power failure memory function of                 time, so after the original call time to complete the remaining time of the experimental work, with a double over-temperature protection, water shortage warning, ensure safety
         5. According to JIS, ASTM, CNS, GB standard parameter setting operation.


Experiment method

GB / T2423.17-2008 salt spray test method
GB / T 2423.18-2000 "basic procedures for electric and electronic products Test Ka"
GB / T10125-1997 Corrosion tests in artificial atmospheres - salt spray test _
GB / T10587-2006 salt spray test chamber technical conditions
GB10593.2-1990 electric and electronic products environmental parameters measurements
GB / T1765-1979 Determination of resistance to humidity, salt spray, weather resistance (artificial acceleration) of the film prepared test

 

 

 

PRODUCT FEATURES

1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.

2, Reservoirs with mixing system on stand.

3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.

4, Exposure zone lined with corrosion-resistant PVC sheets.

5, Clear cover allows viewing of test conditions.

6, Peaked cover prevents dripping of condensation onto samples.

7, Water seal and water level protection system.

8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.

9, Automatic DI water fills to humidifying tower.

10, Digital temperature control.

11, Integral over-protection on heaters.

12, Low water cut-off protection on humidifying tower.

 

 

STANDARD PARAMETERS

Model

HD-E808-90

Internal Dimension (W*D*H)

900*600*500mm

External Dimension (W*D*H)

1410*850*1200mm

Equipment Material

P.V.C rigid plastic plate, thickness 8mm

Sample tray

Diameter 10mm glass fiber rod, anti-rust

V-shape plastic steel to make sure sample in 15~30 degree inclined

Temperature Range

Room temperature ~ 55

Temperature Fluctuations

≤±0.5

Temperature Uniformity

≤±2

Temperature Precision

±1

Spraying method

Continuous and Periodic spray type

Test Chamber Temperature

Salt Spray Method (NSS ACSS)35±1 
Corrosion-resistant Testing Method (CASS) 50±1

Saturated air Barrel Temperature

Salt Spray Method (NSS ACSS)47±1 
Corrosion-resistant Testing Method (CASS) 63±1

Brine Temperature

35±1

Spray Quantity

1.0~2.0 ml / 80cm2 / hr

PH value

Salt Spray Method (NSS ACSS6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2

Lab Volume

270L

Brine Tank Capacity

25L

Multiple Safety Protection Devices

Current discharge protection, over pressure protection, over temperature protection, over load fuse protection

Accessories

Testing Salt/ Measuring tank/Nozzle Equipment x 1 set

Air source

1HP Air pump (provided by buyer)

Test criteria

ASTM B117-08, ISO 9227...

Product number HD-E808-90 Brand HAIDA
price unit Set
Minimum order quantity 1 Supply Capacity 20
payment method L/C , T/T , D/A , D/P , Western Union , MoneyGram ,ect. Certification
Place of origin No. 13 Daxin Street, Daluosha Industrial Zone, Daojiao Town, Dongguan City, Dongguan, Guangdong, China Packing details Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside.